It is that time of year again when our attention turns to the outdoors and the curb appeal of our homes. One easy way to give your front porch a quick face lift is to add or replace an outdoor stair rail.
It is that time of year again when our attention turns to the outdoors and the curb appeal of our homes. One easy way to give your front porch a quick face lift is to add or replace an outdoor stair rail.
Tom and Karen show you how to build a large metal table. Part two describes fabricating the table top and other finishing touches.
Tom builds a custom screen and topper for an outdoor chimenea.
A metal bending ring roller is a great tool for metal shops. See how the Shop Outfitters #238 Ring Roller works.
Tom built a custom metal handrail for his friends at Summit Structures. The job held a challenging element in that the metal handrail was formed on a raduis staircase.
Tom was doing a little window shopping a few years back in Taos New Mexico. As he surveyed some of the shops and art galleries he noticed a theme of “metal art”. Of course, when he returned home he began to think how he could duplicate some of the tables and art work he saw. [...]
Tom often gets requests to build custom metal handrails from both residential builders and commercial companies. His various projects will be posted to this site as they are completed. I thought it might be handy to review a few steps to consider as you begin a handrail fabrication project. Tom’s years spent as a building [...]
Tom builds this unique spinning pot rack using a Shop Outfitters ring roller.
A metal wood ring is easy to make if you have the correct tools. This wood rack was made using the Ring Roller from Shop Outfitters. The Ring Roller Tom used was a 238 Ring Roller. It is made for a maximum of 2″ wide by 3/8″ steel stock. First, figure out the desired ring [...]
Tom Gabriel has built an entire shop/house by himself from pouring the foundation, plumbing, electrical etc.